Fancy Bracket No. 2 Finished

After a bit more miscellaneous metalwork the oil stat bracket is now in place. Then the various bits of plumbing were fitted but not finally tightened as I still have to cut the oil hoses to length and fit the hose ends.So next I need to fit all the hoses and temporarily hang the oil cooler and that's the Oil System finished - apart filing the new stuff.

I started looking at fitting the fuel supply system - shown below is the fuel pressure regulator complete with pressure gauge:
The problem is that this needs to fit between the fuel inlet pipe and the carb - and the distributor and air cleaner are in the way. This needs a bit more thought - and possibly a third fancy bracket??