Friday, 13 April 2007

Same Again

Got home a bit early from work today so managed a quick couple of hours in the garage. Essentially I just repeated the previous exercise on the other side at the front. Lockwire, brake pipes etc. Finished by fitting the braided flexible hoses and tightening all the unions.
To complete things I set the front hub end-floats to the Jaguar spec using a dial gauge as shown below. Whilst I was at it I double checked the brake disc run-out - all was OK.
With the end-floats set I fitted the locking caps and split pins and finally fitted the hub covers.
Job Done!