Double checked all yesterdays measurements - OK. Up on axles stands and wheels off. The whole chassis was then levelled by jacking up and inserting thin washers between the chassis and the axle stands and checking with my fancy new digital level.
Next step is to remove the drive shaft nuts in order to change the shims between the drive shafts and the brake discs:
That's the little beggars in the distance! Hmmmm..... I feel a trip to Machine Mart coming to get a long enough socket extension! Should be strightforward after that.
I also need to get some replacement nuts. They are steel locking nuts and as such cannot be re-used. I'll get some ordered tomorrow.
0 Comments:
Post a Comment