Bonnet Scoop - 1

So..... after the fluid hose bracket I was sitting here thinking what to do next.....? So I plucked up some courage and decided to have a go at attacking the bodywork with the Dremel!!!

I decided to start with something easy..... cutting out the bonnet scoop. To start I cut out the bulk of the opening with a slitting disc, ground back the edge to remove the radius with with a sanding wheel then tidied up with a 80 then a 240 flap wheel.

Only took half an hour and I managed not to cock it up.... fairly chuffed.

So.... that just leaves a big hole to carve into the bonnet.... hmmmm... something for next week!