Carried on working towards the final installation of the dashboard. This necessitates fitting the side carpets as a) the trim finishers fit between the dashboard and the scuttle sides b) it would be difficult if not impossible to fix the carpet to the sides of the body above the level of the bottom of the dash with the dash in place.
So after lots more evo-stik and the knocking on of door seals it was done:
I also drilled a couple of holes adjacent to the fuse box for the fitting of the mechanical temperature gauges:
Which reminds me.... I need to trim some cable ties!
The remaining jobs before the dash goes in are to fit the footwell bulkhead carpets - connect the heater ducting to the heater outlets and fit the washer jet.
0 Comments:
Post a Comment