Engine Bay Louvres - 1

Fitted one of the engine bay louvres tonight. This was done using four M3x30 button head allen bolts self tapped into 2.5mm dia holes. The Louvre was spaced off the back of the rebate by passing the bolts through some small diameter aluminium tubing (again painted matt black). I'm quite pleased with the end result:Looks quite convincing...... could almost be the engine bay behind the vents.... not just a matt black painted rebate! You have to remember that on the GD you can't really have "proper" vents as these would provide an opening into the footwell compartments.... which would be OK if you guarantee you would never drive in the wet.