Saturday 19 July 2008

Fuel Pump Plumbing - 2

Time to finish fitting the fuel pump and filter. Started off by drilling the holes for the brackets and a hole for the fuel pipe grommet:
The pump and filter were then fitted on their respective brackets and the fuel outlet hose made up and fitted:
The hose changes to normal rubber hose as it exits the boot and fits between the chassis and body as shown. I've left this hose long for now so I can pump fuel through from the tank once everything is finished just to ensure everything is clean before connecting up to the chassis hard line:
The last job was to trial fit the tank and make up the feed hose. All the hoses are -8 apart from the fuel pump outlet which is -6.
I'm quite pleased with the results..... just need to figure out how to make a neat job of boxing everything in.

0 Comments: